Electrostatic aluminium sandwich ribbon super tweeters. An ideal enhancement for a wide range of high performance loudspeakers. Provides superior acoustic output from 10kHz to 40kHz than Townshend Maximun super tweeters. Please note it is the buyers responsibility to determine the compatibility including the sensitivity / loudness of these super tweeters with their loudspeaker system, if in doubt please ask. The super tweeters implement the latest high quality RD 1.0 electrostatic sandwich ribbon tweeter that uses 4th generation aluminium ribbon driver technology with a 10 mg low mass 8mm width reinforced aluminium sandwich ribbon diaphragm with an area of 320 mm.Powered by a high power neodymium magnet motor system giving a high sensitivity of 93 dB/1W. These super tweeters exhibit a very flat response with low distortion, fast transition, and neutral timbre with a crisp high frequency acoustic output up to 40 kHz.
The super tweeters have an integral high pass second order-12dB / octave fully phase corrected crossover that can be set to either 10 kHz or 15 kHz via a rear switch (left from the front). Additionally the super tweeters sensitivity can be adjust by either 0dB (93dB), -5dB (88dB) or -10dB (83dB) for optimal loudspeaker sensitivity matching and or personal preference via rear switch (right switchfrom the front). The output of the super tweeters does depend on the highfrequency content of the music and the volume. Also perceived output from the high frequency of the super tweeters does depend on the listeners ability to hear the higher frequency content of the music.
The super tweeters are presented in cylindrical enclosures in a black carbon fibre effect finish which will adorn any host loudspeaker both visually and from a dynamic acoustic performance perspective. Additionally these super tweeters are supplied and fitted with a pair of connection leads terminated with stackable 4mm plugs for rapid out of the box connection.The super tweeters are supplied in an aluminium flight case as shown. 93dB /1m/ 2.83 V.
Frequency range: 10kHz / 15kHz to 40 kHz. 0dB(93dB), -5dB (88dB) or -10dB (83dB). Termination: Colour coded gold plated 4mm terminal /sockets. Size: 90mm diameter x length of 125mm approx. Please note that the performance of these super tweeters has been fully test prior to despatch.Additionally please note that these super tweeters are not sale or return item and all sales are final. The item "Fountek Custom Electro-static ribbon super tweeters with aluminum case" is in sale since Thursday, September 17, 2020. This item is in the category "Sound & Vision\Home Audio & HiFi Separates\Speakers & Subwoofers". The seller is "emoto_sound" and is located in Ashford. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay, Viet nam.